On this page 3 sections
Three-phase distribution that matches the machines — not a single-phase workaround
Three-phase distribution in Sacramento is how most commercial equipment actually runs. Balancing, the available service, and the path to each load decide whether the job is a feeder, a panel, or a service conversation. A converter on single phase is how people buy the same problem twice.
The machines on the floor
A new machine that cannot run on single phase. The distribution has to exist where the machine sits before anyone lands it.
Balanced across the phases
Unbalanced loading or a lost phase is diagnosed before anyone sells a new service. A workaround is not a plan.
The path to each load
Getting three-phase to that end of the building is this job. The landing at one unit is a different page.
Three-phase distribution: voltage, balance, and a path that actually reaches the machines
Three-phase distribution is the path and the voltage the machines can use. If the voltage is wrong, a transformer sits in front of this work. If the voltage is right and the path is not, this job is the distribution. Three-phase work in Sacramento is permitted when the circuit work is new.
-
The voltage the machines need
208, 240, or 480 where the floor does not have it. The transformer is a different page; this job is the distribution around it.
-
Balanced, not guessed
A lost phase or a lopsided panel is named before anyone adds another machine. That is a finding on the existing system, not a quote for a new service.
-
What moves the cost
Which machines, the existing voltage, and whether the service can carry another load. Three-phase distribution in Sacramento is the path, not a single-phase converter.
When three-phase distribution isn’t the right job
Distribution that matches the machines is this job. Connecting one machine, or a service that is already short, are not.
One machine needs a landing
That is three-phase equipment connections.
The service itself is short
That is commercial service upgrade.
Three-phase distribution questions
Can we run it on single phase with a converter?
Not as a plan. This job is three-phase distribution that matches the machines. A workaround is how people buy the same problem twice. The machine connection is three-phase equipment connections.
We lost a phase.
That is a finding, not a quote. Unbalanced loading or a lost phase is diagnosed before anyone sells a new service.
Do we need a transformer too?
If the voltage is wrong, yes — transformers. If the voltage is right and the path is not, this job is the distribution.
The service cannot carry another machine.
That is commercial service upgrade after the calculation, not a default.
Is 240V the same as 3-phase?
Most houses are 240 volt single-phase. Three-phase is a different supply we see on commercial equipment.
Still not sure it is the right job? Call (279) 972-9272 — available 24 hours.
Serving 19 communities across the Sacramento area
Litel Electric serves businesses throughout all 19 communities in our service area — from Davis and Woodland to Roseville, Folsom, and Elk Grove.
Get estimate
Tell us what is happening, or what you are planning. We read the details, tell you what else we need to know, and explain the next step before anything is scheduled.
- 01
You send the problem or the plan, with the address if you have it.
- 02
We reply with what it involves and what has to be seen in person.
- 03
Nothing is scheduled, and nothing is priced, until the equipment has been looked at.
- hi@litelelectric.com
- License
- CSLB #1115460 · C-10 electrical