On this page 3 sections
Panel replacement when the can is the problem — obsolete, damaged, or no longer addable
Panel replacement on a Sacramento commercial building starts with the can: damaged, obsolete, or parts that can no longer be sourced. The load may still be fine. A capacity increase, and a feeder or a local landing, are different scopes, and they get separated before anyone quotes a swap.
-
The can is damaged or obsolete
Heat, corrosion, or a bus that has already been compromised. The building may still draw what it always drew. That is a same-amperage swap, not more amps.
-
Parts can no longer be sourced
Breakers, interiors, or a listing the manufacturer dropped. Keeping a dead can alive with leftovers is how the next failure gets bought twice.
-
Same amperage, new gear
If the load still fits, the job is the can. Whether the building needs more capacity is a different question — and the answer can be no.
Panel replacement on occupied property: shutdown, phasing, and the utility only if the service has to come down
Panel replacement in Sacramento is a swap of the gear, often while the floor stays open. Shutdowns, access, and phasing are planned around the hours the space actually runs. A full service change with the utility is a different window.
-
Occupied through the work
Most commercial panel replacement happens on a working building. Temporary power and a short planned outage keep the tenant open while the can changes.
-
The utility only when the service comes down
A same-amperage replacement of interior gear may not need a disconnect. That split is settled before anyone schedules it. We coordinate the utility when it does.
-
What moves the cost
How much of the gear is coming out, whether the building stays open, and whether a tenant is driving new load. Panel replacement in Sacramento is permitted when the circuit work is new.
When commercial panel replacement isn’t the right job
The gear itself is this job. A proven capacity increase, or a house panel, are not.
The calculation already said the service is short
That is commercial service upgrade.
A house panel, not a building
That is residential panel replacement.
Not sure this is the right job?
Tell us what you are seeing — what is tripping, what changed, or what you are planning — and we will tell you what the work actually is before anyone drives out.
Questions about panel replacement
Do we need more amps, or a new can?
Not automatically more amps. If the gear is the problem and the load still fits, this job is the swap. Whether the building needs more capacity is commercial service upgrade — the answer can be no.
Can this be done while the building is open?
Often. Shutdowns, access, and phasing are planned around the hours the space actually runs. A full service change with the utility is a different window.
Is a subpanel cheaper than replacing the main?
If the service still has headroom and you are out of spaces, a commercial subpanel is the job. Replacing a failed main is this job.
Who coordinates the utility?
We do, when the service has to come down. A same-amperage replacement of interior gear may not need a disconnect. That split is settled before anyone schedules it.
Still not sure it is the right job? Call (279) 972-9272 — available 24 hours.
Serving 19 communities across the Sacramento area
Litel Electric serves businesses throughout all 19 communities in our service area — from Davis and Woodland to Roseville, Folsom, and Elk Grove.
Get estimate
Tell us what is happening, or what you are planning. We read the details, tell you what else we need to know, and explain the next step before anything is scheduled.
- 01
You send the problem or the plan, with the address if you have it.
- 02
We reply with what it involves and what has to be seen in person.
- 03
Nothing is scheduled, and nothing is priced, until the equipment has been looked at.
- hi@litelelectric.com
- License
- CSLB #1115460 · C-10 electrical