On this page 3 sections
LED lighting retrofit on a floor that is still working — not a second guessed layout
An LED lighting retrofit in Sacramento is a lighting job on occupied property: access, drivers, existing controls, and whether the layout is still right. Fluorescent or HID coming out while the floor stays open is this job. Replacing lamps in a fixture that does not suit the space is how people buy a second retrofit.
Fluorescent or HID, layout still right
The fixture type is done. The rooms have not moved. Occupied hours and phasing are the job.
The floor is open during the day
Access and phasing are part of the retrofit, not a surprise after the lamps are ordered.
A lamp-in-place swap that still looks wrong
If the fixture does not suit the floor, a lamp change is a second retrofit. The layout has to be honest first.
LED lighting retrofit: drivers, existing controls, and a layout you are keeping
LED lighting retrofit is drivers, existing controls, and whether the grid still matches the floor. Occupied property means the work is phased. A lamp in a fixture that does not suit the space is how the second retrofit gets bought.
-
Drivers and the existing control
The new LED has to work with the switching that is already there, or the control comes with the retrofit.
-
Phased on occupied property
The floor stays open. Access hours are the scope, not a later conversation.
-
What moves the cost
Fixture count, occupied hours, and whether the layout is still right. LED lighting retrofit in Sacramento is permitted when the circuit work is new.
When an LED retrofit isn’t the right job
Fluorescent or HID coming out on occupied property is this job. A new office layout, or a sweep on a system you are keeping, are not.
The rooms changed and the grid no longer matches
That is office lighting.
The layout is still right and fixtures are failing one at a time
That is lighting maintenance.
The aisles went dark because the racks moved
That is warehouse lighting.
LED retrofit questions
Can we just change the lamps?
Only if the fixture and the layout are still right. A lamp in a fixture that does not suit the floor is a second retrofit.
The floor is open during the day.
That is this job. Access and phasing are the job. A lamp-and-driver sweep on a system you are keeping is lighting maintenance.
The walls moved in the TI.
Then start at office lighting. Retrofitting the old grid into new rooms is how the second retrofit gets bought.
It is a warehouse of HID high-bays.
If the racking is still right, this job is the swap. If the aisles went dark because the racks moved, that is warehouse lighting.
What is LED lighting retrofit?
Replacing lamps, drivers, or fixtures so the existing layout runs LED, or a new layout when the old one is impossible to convert.
Still not sure it is the right job? Call (279) 972-9272 — available 24 hours.
Serving 19 communities across the Sacramento area
Litel Electric serves businesses throughout all 19 communities in our service area — from Davis and Woodland to Roseville, Folsom, and Elk Grove.
Get estimate
Tell us what is happening, or what you are planning. We read the details, tell you what else we need to know, and explain the next step before anything is scheduled.
- 01
You send the problem or the plan, with the address if you have it.
- 02
We reply with what it involves and what has to be seen in person.
- 03
Nothing is scheduled, and nothing is priced, until the equipment has been looked at.
- hi@litelelectric.com
- License
- CSLB #1115460 · C-10 electrical