On this page 3 sections
Warehouse lighting for the racks and the aisles — not an empty-slab catalog
Warehouse lighting in Sacramento is mounting height, spacing, and access. Racking changes the calculation. Doing it from a catalog page for an empty floor is how aisles stay dark.
The aisles went dark after new racking
Spacing from an empty-slab catalog does not survive a racking change. High-bay layout has to be redone for the aisles you have now.
High-bay for this tenant
Mounting height and the fixture you can actually service over the racks. A lamp type without a layout is not the job.
Access to relamp
Lift access, occupied hours, and a fixture that can be reached. A catalog page that ignores access is how the next lamp stays out.
Warehouse lighting: mounting height, spacing, and a fixture you can service over the racks
Warehouse lighting is a layout job: mounting height, spacing between high-bays, and a fixture that can be maintained over the racks. Occupied hours and lift access are part of the scope, not a surprise after the heads are ordered.
-
Height and spacing
Racking height sets the calculation. An empty-slab grid is how the aisles stay dark between the racks.
-
A fixture you can service
High-bay that can be reached with the lift you actually have. A sealed unit nobody can maintain is a dark aisle in a year.
-
What moves the cost
Racking height, occupied hours, and whether the existing circuit can be reused. Warehouse lighting in Sacramento is permitted when the layout is new work.
When warehouse lighting isn’t the right job
High-bay over racks is this job. Warehouse power for the tenant, or an open parking lot, are not.
Docks, machines, and the slab are the job
That is warehouse electrical.
The racking is unchanged and the lamps are the job
That is LED retrofit.
The lot outside
Poles and heads are parking lot lighting.
Warehouse lighting questions
Is this the same as a warehouse buildout?
No. Docks, slab, and power together are warehouse electrical. This job is high-bay coverage over the racks and the aisles.
The HID is failing and the racks did not move.
That is LED retrofit on occupied property. This job is when the layout of the light has to change.
The aisles went dark after new racking.
That is this job. Spacing from an empty-slab catalog does not survive a racking change.
We also need the parking lot.
The lot is parking lot lighting. This job stops at the building.
What type of lighting is best for a warehouse?
Best is a mix: UFO high-bays over open staging, aisle-optic linears over racking, task light at pack-out, dock lights at the doors, emergency units on the path out. All LED, all sized from mounting height, aisle width, rack height, and the IES task for that zone — not from a single fixture.
What are the OSHA lighting requirements for warehouses?
Aisles and task areas need usable light. Fixture type, mounting height, aisle width, rack height, and controls come from the building’s plans. A 32-foot clear bulk warehouse and a 24-foot pick module do not get the same fixture or the same foot-candle target.
Still not sure it is the right job? Call (279) 972-9272 — available 24 hours.
Serving 19 communities across the Sacramento area
Litel Electric serves businesses throughout all 19 communities in our service area — from Davis and Woodland to Roseville, Folsom, and Elk Grove.
Get estimate
Tell us what is happening, or what you are planning. We read the details, tell you what else we need to know, and explain the next step before anything is scheduled.
- 01
You send the problem or the plan, with the address if you have it.
- 02
We reply with what it involves and what has to be seen in person.
- 03
Nothing is scheduled, and nothing is priced, until the equipment has been looked at.
- hi@litelelectric.com
- License
- CSLB #1115460 · C-10 electrical