On this page 3 sections
Whole-home electrification: the plan before the appliances — so the panel is not opened three times
Whole-home electrification in Sacramento is the written read on what it takes to get the house off gas: what the service can carry, which circuits have to be added, and which jobs should happen together. It is the right page when more than one appliance is coming out. One decided load has its own circuit page.
More than one appliance is coming out
Induction, a dryer, a heat-pump water heater, a mini-split. The assessment names them in order so the panel is opened once.
The order of work
A remodel is often the chance to do the electrical once. Buying the appliances first is how people buy a circuit the service cannot carry.
What the service can carry
Whether the home needs more capacity is still a question — the answer can be no. A close service can often take the new loads with load management. A 200-amp increase is only after that need is established.
Whole-home electrification names the circuits in order, and whether the service is actually short
Whole-home electrification is a written read: which dedicated runs get added, in what order, and whether the service can carry them. Load management can keep a close service honest. 200 amps is only after the need is established.
-
The circuits, in order
Each decided load has a dedicated run. The assessment is the sequence, not a guess at 40 amps for everything.
-
Capacity is a question, not a default
A healthy service often absorbs staged electrification. The panel-upgrade question still gets asked — the answer can be no.
-
What moves the cost
How many appliances, whether the walls are open, and whether the service is genuinely short. Whole-home electrification in Sacramento is the plan before anyone pulls cable.
When the assessment isn’t the right job
This is the whole-house order of work. If one appliance is already decided, you want that circuit, not a plan.
One appliance is already decided
That circuit is its own page — start at induction range circuit, the dryer circuit, the heat-pump water-heater circuit, or the heat-pump / mini-split circuit.
The service is close, not clearly over
Load management can keep a heat pump or a charger on a service that cannot run every load at once. It is not a 200-amp upgrade.
The load calculation already says the service is short
That increase is a 200-amp service upgrade after the need is established.
Whole-home electrification assessment questions
Do I need a panel upgrade for this?
Not always. Electrifying in stages — a heat pump here, an induction range there — a healthy service can often absorb, especially with load management staging the big loads. Whether it is genuinely short is the panel upgrade question, and the answer can be no.
I only have one appliance coming out.
Then this isn’t the right job. A decided induction range is the induction range circuit. A dryer, a heat-pump water heater, or a mini-split each have their own circuit page.
Should I buy the appliances first?
Easier not to. What the service can carry and which circuits have to be added narrow the equipment. Buying first is how people buy a range the panel cannot take.
Is this the same as 200 amps?
No. 200 amps is the increase after the need is established. A close service can often share with load management instead.
Is house all-electric a good idea?
It works when the service, the circuits, and the appliances are planned together. We start at the main panel and with a list of the appliances you intend to use.
Still not sure it is the right job? Call (279) 972-9272 — available 24 hours.Want the detail? Electrification order of work
Helpful guides
Electrification order of work
Heat pump, water heater, induction, dryer, EV — sequenced so the panel is not opened three times. Call (279) 972-9272.
Read guideInduction range circuit
The circuit is sized to the range you are actually installing — kW, amps, four-wire, cord or hardwire. The old gas outlet is not that circuit. Call (279) 972-9272.
Read guide
Serving 19 communities across the Sacramento area
Litel Electric serves homeowners throughout all 19 communities in our service area — from Davis and Woodland to Roseville, Folsom, and Elk Grove.
Get estimate
Tell us what is happening, or what you are planning. We read the details, tell you what else we need to know, and explain the next step before anything is scheduled.
- 01
You send the problem or the plan, with the address if you have it.
- 02
We reply with what it involves and what has to be seen in person.
- 03
Nothing is scheduled, and nothing is priced, until the equipment has been looked at.
- hi@litelelectric.com
- License
- CSLB #1115460 · C-10 electrical